Table of Contents
Advertisement
Next steps
1
Install the PCIe card.
2
Complete the procedure listed in After working inside your system.
Initializing TPM for BitLocker users
•
For more information, see
The TPM Status changes to Enabled, Activated.
Initializing TPM for TXT users
1
While booting your system, press F2 to enter System Setup.
2
On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3
From the TPM Security option, select On with Pre-boot Measurements.
4
From the TPM Command option, select Activate.
5
Save the settings.
6
Restart your system.
7
Enter System Setup again.
8
On the System Setup Main Menu screen, click System BIOS > System Security Settings.
9
From the Intel TXT option, select On.
Restoring the Service Tag by using the Easy Restore feature
About this task
By using the Easy Restore feature, you can restore your Service Tag, license, UEFI configuration, and the system configuration data after
replacing the server board. All data is automatically backed up in a backup flash device rSPI card automatically. If BIOS detects a new server
board and the Service Tag in the backup flash device rSPI card, BIOS prompts the user to restore the backup information.
Steps
1
Turn on the system.
If BIOS detects a new server board, and if the Service Tag is present in the backup flash device rSPI card, BIOS displays the Service
Tag, the status of the license, and the UEFI Diagnostics version.
2
Perform one of the following steps:
•
Press Y to restore the Service Tag, license, and diagnostics information.
•
Press N to navigate to the Dell Lifecycle Controller based restore options.
•
Press F10 to restore data from a previously created Hardware Server Profile.
After the restore process is complete, BIOS prompts to restore the system configuration data.
3
Perform one of the following steps:
•
Press Y to restore the Service Tag, license, and diagnostics information.
After the restore process is complete, BIOS prompts to restore the system configuration data.
4
Perform one of the following steps:
•
Press Y to restore the system configuration data.
•
Press N to use the default configuration settings.
After the restore process is complete, the system restarts.
https://technet.microsoft.com/en-us/library/cc753140.aspx
Installation and Service Manual
Installing and removing server components
87
Advertisement
Table of Contents
