Planet ICS-10 Series User Manual page 33

 TCP Port Number
 Inactive Timeout
Example: Use Microsoft Windows Hyper Terminal, TCP/IP Winsock mode
HyperTerminal is a program that you can use to connect to other computers, Telnet sites, onlin
computers, using your modem, a null modem cable, a Console cable or Ethernet connection.
The users want to use the TCP Server mode to connect
1. Setup Operation Mode and Serial Port of ICS-10x
2. Hyper Terminal set up a new connection with the TCP/IP Winsock
Setup Operation Mode and Serial Port of ICS-10x
interface, set the Serial operation mode of ICS-10x to "TCP Server" and set the TCP Port Number to
1. From the WEB
"23".
Pair Connection - Local(Master)

Pair Connection - Remote(Slave)

The default mode is "Disable".
The TCP port that ICS-10x uses to listen to connections and that other device
must use to contact ICS-
default is set to "1024".
Use the parameter to set an inactive timeout. The unit drops the connection if
there is no activity on the se
inactive timeout enter "0".
to an Ethernet Switch via Hyper Terminal, Winsock mode
Figure 4-14 Example: TCP erver Configuration screen
-28-
10x. To avoid conflicts with well known TCP ports, the
rial line before the set time expires. To disable the
S
User's Manual of ICS-10x
e services, and host