Table of Contents
Advertisement
8.
Enter the host address and port number, and then click OK.
Value
Host address
port
9.
Then can use the serial console cable to connect with the switch.
Figure 4-19 Example: Hyper Terminal configuration
Description
The address or name of the connection you want to create. This can be in stan
dotted notation (for example, w.x.y.z) or can be the site's user-friendly name.
The number of the port that you want the connection to use. Port 23 is the default.
Figure 4-20 TCP/IP Winsock connection screen
-31-
User's Manual of ICS-10x
dard Internet
Advertisement
Table of Contents
