Network Configuration - Planet ICS-10 Series User Manual

4.3 Network Configuration

This function allows setting the value for network configuration. The value is DHCP client, IP address, Subnet Mask,
Gateway, DNS and system name. Press the "Apply" button to set the value. The screen in Figure 4-10 appears.
The page includes the following configurable data:
 DHCP Client
 IP Address
 Subnet Mask
 Gateway
 DNS
 System Name
Figure 4-10 Network Configuration screen
Disable or enable the DHCP function.
When DHCP Client is set to "Enable", the ICS-10x will send a DHCP request to the DHCP
server in the network. Once the DHCP Server get the request, it will assign a dynamic IP
address, subnet mask and gateway to the ICS-10x.
The factory default setting is "Disable"
Assign the converter IP Address.
The factory default value is 192.168.0.100
Assign the converter Subnet Mask.
The factory default value is 255.255.255.0
Assign the converter gateway.
The factory default value is 192.168.0.254
DNS is the way that Internet domain names are identified and translated into IP addresses.
A domain name is an alphanumeric name, such as planet.com, that it is usually easier to
remember. Assign the DNS server IP address.
Allow set value for system name. (The maximum length is 15 characters).
-25-
User's Manual of ICS-10x