Table of Contents
Advertisement
A.5 Fiber Optical Cable Connection Parameter
The wiring details are as below:
Fiber Optical patch Cables: (For ICS-102 / ICS-102S / ICS-105A)
■
Model
Standard
100Base-FX
ICS-102
Wavelength (1300nm)
100Base-FX
ICS-102S
Wavelength (1310nm)
100Base-FX
ICS-105A
Wavelength (Depend on SFP module)
A.6 Power Information
The power jack of ICS-10X is with 2.5mm in the central post and required +5VDC power input. It will conform to the
bundled AC-DC adapter and Planet's Media Chassis. Should you have the problem to make the power connection, please
contact your local sales representative.
Please keep the AC-DC adapter as spare parts when your ICS-10X is installed to a Media Chassis.
2.5mm
DC Receptacle 2.5mm
+5V for each slot
DC receptacle is 2.5mm wide that conforms to and matches the Media Converter 2.5mm DC
jack's central post. Do not install any improper unit, model of the Media Converter
2080-AA3600-005
Fiber Type
Multi-mode
Single-mode
Multi-mode
Single-mode
-67-
User's Manual of ICS-10x
Cable Specification
50/125μm or 62.5/125μm
9/125μm
50/125μm or 62.5/125μm
9/125μm
Advertisement
Table of Contents
