Planet ICS-10 Series User Manual page 54

Example: Two ICS-10x with Pair Connection mode
One be configured as
The other one be configured as
Via the RS-485 interface, the external scanners, speed dome cameras and PTZ receivers can be controlled by the
keyboard which provides upward, downward, leftward, rightward, clockwise and counterclockwise with the joystick. In this
case, we use two ICS-10x to extend the distance between an IP surveillance PT Camera and a Control keyboard. Both of
the two equipments are implemented with RS-485 interface.
The two of the ICS-10x master and slave with below settings:
ICS-10x Master
Connect to
IP Address / Subnet Mask
Operation Mode
Serial Port Configuration
ICS-10x Slave
Connect to
IP Address / Subnet Mask
Operation Mode
Serial Port Configuration
Topology:
Pair Connection – Local
Control Keyboard
192.168.0.100 / 255.255.255.0
Mode: Pair Connection – Local
TCP Port Number : 1024
Serial Mode:
Baudrare:
Character Bits:
Parity Type :
Stop Bit :
Hardware Flow Control:
Speed Dome Camera, PTZ or Scanner
192.168.0.101 / 255.255.255.0
Mode:
Remote Host IP Address :
Remote Host Port Number :
Serial Mode:
Baudrare:
Character Bits:
Parity Type :
Stop Bit :
Hardware Flow Control:
Figure 4-49 Two ICS-10x configured with Pair-Connection
(Master)
Pair Connection – Remote
RS-485
9600
8
none
1
none
Pair Connection – Remote
192.168.0.100
1024
RS-485
9600
8
none
1
none
-49-
User's Manual of ICS-10x
(Slave)