Planet ICS-10 Series User Manual page 40

The page includes the following
 TCP Port Number
 Inactive Timeout
Example: Use PLANET VCOM Utility + Microsoft Windows Hyper terminal COM Port
mode
The user want to use the virtual COM like to use the serial cable connect the switch.
1. Setup Operation Mode and Serial Port of ICS-10x
2. Use PLANET VCOM Utility to create virtual COM Port
3 . Hyper Terminal set up a new connection with the virtual COM port
Figure 4-26 Virtual COM Configuration screen
fields:
The TCP port that ICS-10
must use to contact ICS-10x. To avoid conflicts with well known TCP ports, the
default is set to "1024".
Use the parameter to set an
there is no activity on the serial line before the set time expires. To disable the
inactive timeout enter "0".
Figure 4-27 Virtual COM mode
-35-
x uses to listen to connections and that other device
inactive timeout. The unit drops the connection if
User's Manual of ICS-10x