Planet ICS-10 Series User Manual page 56

ICS-10x – Slave: be configured to Pair-Connection-Remote
5. From Web interface, login the ICS-10x with IP address = 192.168.0.101, set up the operation mode of this unit to be
" Pair Connection-Remote (Slave)"
Figure 4-52 Pair Connection –Remote, operation mode configuration
Set the Serial Port mode of ICS-10x-Slave to RS-485.
6 .
7. The control keyboard can remote control the IP camera.
Figure 4-51 Pair Connection – Local, serial port configuration
-51-
User's Manual of ICS-10x