Nortel 1002rp Maintenance And Diagnostics page 148

Replacing media drives
Figure 30: Remove media drive from chassis
3 Hold cables away from the drive bay as you pull the media drive
carrier away from the chassis until the connectors attached behind
the components can be reached.
.
4 Label and disconnect cables from installed media drives, and then
free the carrier from the chassis.
148
CAUTION
Risk of equipment damage
To avoid damaging cables during this procedure, ensure
that no cables are crossed when moving the media drive
carrier in and out of the drive bay.
Standard 1.11
G100747
CallPilot