Aficio 1035 Operating Instructions Manual page 56

Troubleshooting
Messages/Second messages
Duplex has been cancelled.
Exceeded max capacity of
document server. Cannot
store.
Exceeded max number of
pages per file of document
server. Cannot store.
Exceeded max number of
pages per file of document
server. Cannot store.
4
Exceeded max. pages. Col-
late is incomplete.
Exceeded max. stored files in
sample print and locked
print.
Exceeded max. stored pages
in sample print and locked
print.
F0:Error
F8:Error
Finisher is in use for another
function. Please wait.
Hardware Problem
Ethernet
Hardware Problem
IEEE1394
Hardware Problem
HDD
Hardware Problem
Option RAM
HDD has not been installed.
42
Descriptions and Solutions
Try installing an SDRAM module. When doing this, contact
your service representative. Also, use paper with size for du-
plex printing.
Make the size of the transmission files smaller, or delete some of
the files from the document box.
Delete some of the files from the document box.
Lower the number of pages in the transmission files, or delete
some of the files from the document box.
Lower the number of pages sent or the transmission data.
Delete unnecessary files from the machine.
Lower the number of pages to be printed.
Try installing an SDRAM module or lowering the transmission
data. When installing an SDRAM module, contact your service
representative.
Check the transmission parameters.
The Finisher is being used by another function such as copy.
Please wait until the other function has completed using the fin-
isher.
An error has occurred in the optional Network Interface Board.
Turn off the power switch. Replace the Network Interface Board
and turn on the power switch.
An error has occurred in the optional 1394 Interface Unit.
Turn off the power switch. Replace the 1394 Interface Unit and
turn on the power switch.
An error has occurred in the optional Hard Disk Drive.
First turn the power switch off and then on, If the message ap-
pears again, call your sales or service representative.
An error has occurred in the optional Memory Unit.
Turn off the power switch, Replace the Memory Unit, and then
turn on the power switch.
Install an HDD unit when not available. If this error does reoc-
cur even if there is an HDD unit installed, contact your service
representative.
'UDIW