Messages/Second messages
D1:Error
D2:Error
D3:Error
D4:Error
DC:Error
DD:Error
DE:Error
DF:Error
DIMM has a problem. Call
service representative.
Disposable toner near full.
Driver setting error. (Memo-
ry)
Driver setting error. (Memo-
ry)
Error & Status Messages on the Operation Panel
Descriptions and Solutions
Try the following:
• Execute command ESC.E
• Print out a print condition list.
• Reset the machine.
Try the following:
• Execute command ESC.E
• Print out a print condition list.
• Reset the machine.
Try the following:
• Execute command ESC.E
• Print out a print condition list.
• Reset the machine.
Try the following:
• Execute command ESC.E
• Print out a print condition list.
• Reset the machine.
Try the following:
• Execute commands OE or IN.
• Print out a print condition list.
• Reset the machine.
Try the following:
• Execute commands OE or IN.
• Print out a print condition list.
• Reset the machine.
Try the following:
• Execute commands OE or IN.
• Print out a print condition list.
• Reset the machine.
Try installing an SDRAM module. When doing this, contact
your service representative. If this message appears after install-
ing an SDRAM module, try lowering the amount of data.
The DIMM inside the machine is abnormal. Replace the DIMM.
For replacement, contact your service representative.
The disposable toner is near full. Contact your service repre-
sentative.
Set correctly the character code.
Correct the Font Set Download parameters.
'UDIW
4
41