Table of Contents
Advertisement
3. Printing with the Operation
SAMPLE PRINTING
Use this function to print only the first set of a multiple-set print jobs. The re-
maining sets are saved on the Hard Disk Drive in the machine. The saved jobs
can be printed or cancelled from the machine's operation panel. This can help in
avoiding large amounts of misprints in case of mistakes in the content or in the
printing settings.
Reference
For details on configuring the printer driver, refer to the Help of the printer
driver.
Note
If the application has a collate option, make sure that it is not selected before
sending a print job. By default, sample print jobs are automatically collated
by the printer driver. If a collate option is selected from the application print
dialog box, more printings than intended may be printed.
You can identify the file you want to print by the User ID and the date and
time when the job was stored.
The actual number of pages the machine can save depends on the contents of
the print image. For example, the machine can save up to 30 jobs or 2,000 pag-
es. It depends on the data volume.
If the first set of the sample print files is not as you expected and you do not
want to print the remaining sets, delete the sample print file using the Display
panel. If you print the remaining sets of the sample print file, the job in the
machine is deleted automatically.
Printing a Sample Print File
The following procedure describes how to print a sample print file with the PCL
printer driver. For information about how to print a sample print file with the
PostScript printer driver, see the PostScript Operating Instructions included as
a PDF file on the CD-ROM.
Limitation
Applications, like PageMaker, which use original drivers do not work with
this function.
A
From an application, select the menu command to print.
The print dialog box appears.
B
Open the [Pinter Properties] dialog box.
Panel
'UDIW
25
Advertisement
Table of Contents
