Table of Contents
Advertisement
Using the Operation Panel
Slip Sheet Tray (Copy/
Document Server)
Timer Setting
When entering Set Time mode, if a key operator code has already been set, you
must enter the code (up to 8 digits). P.XX"User Code Setting".
5
Menu
Auto Off Timer
Panel Off Timer
66
Note
Default:
• Tray to program: None
• Copying Method in Duplex: 2 Sided Copy
• Apply Auto Paper Select: At Mode Selected
When you use the Slip Sheet function, you can use the output
tray specified in the Slip Sheet Tray setting.
When At Mode selected is selected, the options are only dis-
played when the cover function or slip sheet function is selected.
Reference
Copy Reference "Cover/Slip Sheet"
Description
The machine turns itself off automatically to conserve energy after
your job is finished, after the selected time. This function is called
"Auto Off". The Time can be set from 1 to 240 minutes.
Note
Default: 1 minutes
Enter number with ten keys
Use [← ← ← ← ] key and [→ → → → ] key to switch between minites and seconds.
Auto power off may not work while an error is displayed.
This sets the amount of time the machine waits before switching the
panel off, after copying has finished or no operations are performed
with the machine.
Note
The default setting is the same interval as for the Auto Off Timer,
so the Panel Off Timer is not used. This setting is only used if the
Auto Off Timer setting is set to a longer interval than the Panel
Off Timer setting.
The warm up time for making a copy from standby mode is
three seconds.
The default setting is 1 minute
Enter a time interval between 10 and 240 seconds with the
number keys.
Press the <- or -> keys to move the cursor between minutes and
seconds.
'UDIW
Advertisement
Table of Contents
