Wifi And Remote Control - Wasp Delta 4070 Industrial X Series Manual Of Use And Maintenance

8
USE OF THE PRINTER
8
P
remises

8.12. Wifi and remote control

The printer to be used in full of its possibilities needs to be connected to a wi-fi network.
It is important that the network is:
• safe
• stable
• managed by those who manage the machines
• does not overcharge
• correctly connected to the internet
• possibly dedicated to computer-printer communication
To correctly connect the machine to a wifi network:
1. Make sure the wifi network is switched on and visible
2. Turn on the machine
3. Enter the advanced> wifi settings menu
4. Fill in the format choosing among the visible networks that request, enter password (if any) and username (if
necessary)
5. The machine will reboot and if the information is correct it will be connected to the chosen wifi
6. In the machine's main screen will appear an information about the wifi connection (including the IP address of
the machine to connect with the computer)
When the wifi settings are set the machine will try to automatically reconnect to the saved wifi network as it is
turned on.
Once the machines is connected to the network can be controlled through a computer's browser connected to
the same wifi network as the printer.
To access the printing server:
1. Make sure that both the computer and the printer are connected to the same wifi network
2. Enter the IP address that appears on the machine into the browser's URL * (eg http://192.128.12.114)
3. The browser will enter the printing server for monitoring and controlling the machine "
4. To access all the functions log in with your account on "Octoprint" with username "user" and password
"password"
To enter the machine control interface:
1. Make sure that both the computer and the printer are connected to the same wifi network
2. Enter in the URL of the browser* the IP address that appears on the machine adding at the bottom "/ wasp"
(eg http://192.128.12.114/wasp)
3. The browser will enter in a page very similar to the printer interface, where you can work with the same
commands.
* Changing browsers can change the use's possibilities and the view's correctness.
In the absence of a fixed and stable network it is also possible to set up a wifi hotspot from a smartphone or
tablet, proceeding in the same way as described above.
With the same IP address you can also connect from smartphone, tablet or any device with the use of a browser
and the possibility to connect to the wifi.
All protocols work independently on Windows operating system, OSX, Linux.
To use a wired network instead of wifi, there must be a DHCP server on the network that can automatically
configure the printer.
In case a manual configuration is required (FIXED IP) it will be possible to do it through the WIFI configuration by
selecting "NOWIFI / STATIC IPv
78
© WASP S.r.l.