8
USE OF THE PRINTER
8
P
remises
8.6. Manual extrusion
Manual extrusion is an operation that is carried out when the machine is stopped, to verify that the plastic outlet
is homogeneous.
To do this it is necessary to take the nozzle to the print temperature of the plastic you are working with.
The procedure is this:
1. Set the extruder temperature by selecting it on the initial screen
2. Wait until it reaches the temperature
3. Select the "extrude / retract" command from the "PREPARE" menu
4. Click the down arrow to extrude the material
62
© WASP S.r.l.