Wasp Delta 4070 Industrial X Series Manual Of Use And Maintenance page 69

8
USE OF THE PRINTER
8
P
remises
DISASSEMBLE FLEX EXTRUDER
1. Perform the removal of the filament as described in paragraph 5.3 "First start"
2. Turn off the machine
3. Unplug the external connector
4. Pull the connection cable trough the hole
5. Unplug the main connector from the extruder
6. Unscrew the 6 screws fizing the effector with the support arms with a 3mm Allen key
7. Remove the arms from the effector, with the help of a long flat screwdriver
8. Remove the whole extruder and store it with caution
fig 8-9 i fig 8.9 j
© WASP S.r.l.
69