Description Of The Printer - Wasp Delta 4070 Industrial X Series Manual Of Use And Maintenance

2

Description of the printer

2
P
remises
2 DESCRIPTION OF THE PRINTER
The device described in this manual is a 3D printer suitable for 3D printing with the use of filament in thermoplastic
material.
The printer consists of an heated extruder mounted on a Delta-robot structure, a bed of work and a group of
spools.
The material is unrolled from the spool, pushed on the heated nozzle where melts and is extruded through a hole
that deposes very small amounts of material on the bed of work. The material is deposed by the toolhead layer-
on-layer. The layers are defined by the file produced with the use of a slicing software. It's possible in this way to
create any shape and kind of object in the limits of this technology.
Fig. 2 - Printer
© WASP S.r.l.
15