General Information; Manufacturer Identification Data; Indentification Label - Wasp Delta 4070 Industrial X Series Manual Of Use And Maintenance

1 GENERAL INFORMATION

1.1. Manufacturer identification data

1.2. Indentification label

The printer is CE marked and complies with all relevant provisions:
Machinery Directive 2006/42 / EC, EMC Directive 2014/30 / EU and LVD Directive 2014/35 / EU
EN 55022
EN 55024
EN 60204-1
The marking can be identified by means of an identification plate of the Manufacturer as required by the Machinery
Directive. In case of damage, the Recipient must commission a copy.
Legend:
1. Model
2. Voltage
3. Maximum power
4. Year of production
5. Serial number
© WASP S.r.l.
WASP S.r.l.
Viale Zaganelli, 26 - 48024 Massa Lombarda (RA) Italy
Tel. +39 0545 82966
info@3dwasp.com / www.3dwasp.com
1
2
3
4
5
General information
1
P
remises
7
1