Continuous Printing; Deleting Gcode From Machine - Wasp Delta 4070 Industrial X Series Manual Of Use And Maintenance

8
USE OF THE PRINTER
8
P
remises

8.4. Continuous printing

Continuous printing is an option to print in sequence with the two nozzles.
The printing starts with the left extruder and as soon as the end-filament sensor of the first nozzle realizes that
it is without material, it switches the second nozzle which continues processing, conserving temperatures and
settings.
Requirements to be taken into consideration:
• Option available only with Zen extruder
• The nozzles must both be well calibrated
• Neither nozzle must be clogged
• The material must be correctly loaded on both nozzles
• The filament feed sensor must not be disabled in the advanced settings
• The continuous printing option must be activated in the advanced settings

8.5. Deleting gcode from machine

To delete gcode from the machine memory enter into the gcode' list from the "PRINT" menu.
Press and hold the gcode you want to delete for at least two seconds, then select OK in the warning message
that appears.
60
© WASP S.r.l.