Transport And Handling; General Warnings; Delivery Of The Printer - Wasp Delta 4070 Industrial X Series Manual Of Use And Maintenance

Hide thumbs Also See for Delta Wasp 4070 Industrial X Series:

Table of Contents

3 TRANSPORT AND HANDLING

The reading of this chapter assumes, in order to use the printer safely, the knowledge of the contents of paragraph

1.6 "General safety warnings".

Furthermore, the specific requirements for safe interaction with the printer, related to this chapter, are detailed

in the following paragraphs.

ATTENTION:

The operations related to these activities must be performed by authorized and professionally

qualified personnel.

ATTENTION:

During operations, the operator must wear all the necessary Personal Protective Equipment (PPE).

Upon receipt, make sure that:

•

The printer has not been damaged during transport;

•

Any packaging has not been tampered with consequent removal of parts from the inside;

•

The supply corresponds to the order specifications.

NOTE:

If the printer needs to be stored for a certain period of time before installing it, it is recommended to

protect it adequately and store it in a suitable environment (with a temperature between 5 ° C and 40

° C and relative humidity between 20 % and 60% non-condensing) and protected from atmospheric

agents in order to avoid deterioration.

ATTENTION:

During storage, never stack the boxes containing the equipment.

Transport and handling

remises

Table of Contents