Adhesion To The Bed; Selecting Gcode; Function During The Print; Piece Removal - Wasp Delta 4070 Industrial X Series Manual Of Use And Maintenance

6
First use of the printer
6
P
remises

6.6. Adhesion to the bed

Before each print it is necessary to put a layer of glue, supplied with the printer, on the aluminum bed.

6.7. Selecting gcode

Select the printing file from: PRINT>GCODE .
Printing will start as soon as the printing bed and the extruder reach the pre-set temperatures.

6.8. Function during the print

During the print, new functions such as pause, change filament, stop and save and stop are activated.

6.9. Piece removal

Remove the piece from the bed by using a spatula
For information and support please visit F.A.Q. section on our website: www.3dwasp.com
© WASP S.r.l.
37