Table of Contents
Advertisement
Adjusting the picture
Sharpness / Gamma / Noise reduction
Procedure of adjustment
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
SECURITY
PICTURE
PICTURE MODE
COLOR
TINT
COLOR TEMP.
GAMMA
CONTRAST
BRIGHT
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
:MENU SELECT
:ADJUST
Adjustment items
Sharpness
Gamma selection
Noise reduction
Note
• Noise reduction cannot be adjusted with analog RGB input, DVI input or network input.
• Separate software is required to select "USER1" and "USER2" as the gamma setting. Consult your
dealer.
To display pictures complying with the sRGB standard
sRGB is the international reproduction standard (IEC61966-2-1) established by IEC (International
Electrotechnical Commission).
To reproduce colours more faithfully in compliance with the sRGB standard, perform the following setting
procedure.
1. Set color matching adjustment to "OFF".
2. Press the
Set to "NATURAL" with the
3. Select the "COLOR" with the
Press the STD (standard) button on the remote control to restore the factory default.
Follow the same procedure to restore the factory default for "TINT", "COLOR
TEMP." and "GAMMA".
Note
• sRGB is only enable when RGB signals are being input.
52
DYNAMIC
50
30
DEFAULT
2.2
32
32
6
2
1
Operation
Sharpens the outline of the image.
Switches the gamma modes
Switches the noise reduction effect
mode.
buttons on the "PICTURE" menu and select the "PICTURE MODE".
buttons.
Press the "MENU" button.
The MAIN MENU screen will be displayed.
Select "PICTURE" with the
buttons.
Press the "ENTER" button.
The PICTURE screen will be displayed.
Select desired one of the items in the
following table with the
Switch the setting with the
buttons.
Refer to the following table for the items and the
details.
0 to 7 for the RGB system and the HD system
(factory setting is 2)
0 to 15 for the SD system (factory setting is 6)
5 settings: DEFAULT, USER1, USER2, 2.2 and
2.5
(factory setting: DEFAULT)
Four types: OFF (no correction), 1 (low),
2 (middle), 3 (high) (factory default: 2)
buttons.
buttons.
Adjustment
Advertisement
Table of Contents
