ENGLISH
14. Life stages of the unit
The unit life phase definitions are described in the following table.
Table 5 – Life stages of the unit
PHASE
Transportation
Handling
Unpacking
Assembly
Ordinary use
Adjustments
Cleaning
Maintenance
Dismantling
Demolition
15.
Reference standards
MACHINE DIRECTIVE 2006/42/EC
•
LOW VOLTAGE DIRECTIVE 2014/35/EU
•
ELECTROMAGNETIC COMPATIBILITY DIRECTIVE 2014/30/EU
•
PRESSURE VESSELS DIRECTIVE 2014/68/EU, module A 2 for Cat. I or Art. 4 Par. 3, as indicated on the
•
PED label of the exchanger.
ERP DIRECTIVE 2009/125/EC
•
HARMONISED STANDARD EN378 Refrigeration systems and heat pumps.
•
EN 1090-2 Execution of steel and aluminium structures
•
www.modine.com
DESCRIPTION
It consists of transferring the unit from one location to another through the use
of suitable means
It consists of transferring the unit from and on the means used for
transportation and movements within the plant
It consists of removing all the materials used for packaging of the unit
It involves all the assembly operations that initially prepare the unit for fine-
tuning
Use for which the unit is intended (or that is considered usual) in relation to its
design, construction and function
These involve the adjustment, fine-tuning and calibration of all those devices
which must be adapted to the condition of operation normally envisaged
It involves the removal of dust, oil and residues of processing that could
compromise the efficient operation and use of the unit, as well as the health
and safety of the operator
It involves periodic verification of the parts of the unit that can wear out and
that must be replaced
It involves the complete or partial dismantling of the unit for any type of
necessity
It involves the definitive removal of all parts of the unit resulting from the
operation of definitive dismantling to allow the possible recycling or
differentiated collection of components according to the procedures laid down
by the existing rules of law
38
Need help?
Do you have a question about the ECO and is the answer not in the manual?