Modine Manufacturing ECO Technical Manual page 34

ENGLISH
11.11.5. After having cleaned the finned pack, perform a visual inspection to identify any dirt or the presence of
fins that are damaged (repeat the cleaning operation if necessary).
11.12. Only use original spare parts. Do not wait until the component is completely inoperative.
replacements can significantly improve the performance and extend the life span of the model.
11.13. For the maintenance of any accessories or components mounted on the model, refer to the relative user
manuals.
11.14. After each maintenance operation, perform the checks before commissioning according to Chap. 9 "Checks to
be performed before start-up" and after commissioning according to "Checks to be performed after start-up".
11.15. During the dismantling and scrapping phases be sure to use the appropriate personal protection equipment (see
"Residual risks"). Ensure the complete emptying of fluids with correct disposal. Pay particular attention to sharp
edges.
11.16. See the "Technical Data" to locate the fan and conveyor part code.
www.modine.com
Preventive
34