Precautions - Adtech ADT-09 Series Manual

ADT-09 Series Motion Control Card

5.6. Precautions

◆ Transport and storage:
➢ Do not stack product package more than six layers;
➢ Do not climb, stand on or place heavy stuff on the product
package;
➢ Do not pull the cable still connecting with machine to move
product.
➢ Forbid impact and scratch on the panel and display;
➢ Prevent the product package from humidity, sun exposure, and
rain.
Open -box inspection:
◆
➢ Open the package to confirm the product to be purchased by
you.
➢ Check damages situation after transportation;
➢ Confirm the
damages situation;
➢ Contact our
accessories, or transport damages.
Wiring
◆
➢
Ensure the persons involved into wiring and inspecting are
specialized staff;
➢ Guarantee the product is grounded with less than 4Ω
grounding resistance. Do not use neutral line (N) to substitute
earth wire.
➢
Ensure grounding to be correct and solid, in order to avoid
product failures or unexpected consequences;
➢
Connect the surge absorption diodes to the product in the
required direction, otherwise, the product will be damaged;
➢
Ensure the power switch is OFF before inserting or removing
plug, or disassembling chassis.
Overhauling
◆
➢
Ensure the power is OFF before overhauling or components
replacement;
➢
Make sure to check failures after short circuit or overloading,
and then restart the machine after troubleshooting
➢
Do not allow to frequently connect and disconnect the power,
integrity of parts comparing with the parts list or
company promptly for discrepant models, shortage
http://www.adtechcn.com
61