Husqvarna 536LiL Workshop Manual page 67

Troubleshooting - annex
5. Motor and current contacts
Make sure the three small motor communication
cables and the two current contacts are fixed to
respective covers.
5. Motor and power connectors
Make sure the three motor connectors and the
two power connectors are properly connected to
respective plastic housing.
6. 26-pin connector
Make sure the 26-pin connector is coupled cor-
rectly, dry and not damaged.
6. 6. 26-pin wiring cable
Make sure the 26-pin wiring cable is properly as-
sembled, dry and not damaged.
– 67
English