Husqvarna 536LiL Workshop Manual page 63

12 Troubleshooting - annexe
12.1 For products with S/N: -2015080000 (536LiL), -2015100000 (536LiR).
1. Current contacts
Make sure the contacts are clean and that none of
the metal surfaces are damaged. Take extra care in
checking the connection tabs. The current contacts
have the same basic design for product, battery and
charger. It is only the colors that can differ.
2. Keypad connector
Make sure the two parts of the connector
are secured properly. Look for damaged and
loose cables.
3. Breaker signal contact
Make sure the female contact is securely con-
nected to the breaker Look for damaged and loose
cables. Look also for signs of water, corrosion and
short circuiting on the contact and pins when they
are dismantled.
Figure 1
Figure 2
Figure 3
Troubleshooting - annex
– 63
English