Diagnosis and troubleshooting
6.8 Troubleshooting the control unit
BLDC - LiL/LiLX S/N 201508001- / LiR /
LiRX S/N 2015100001-
Check that the blade terminals and associated
wires are not bent or damaged.
(A) 4.8x0.8mm M phase (Gray wire)
(B) 4.8x0.8mm M phase (Black wire)
(C) 4.8x0.8mm M phase (Red wire)
See figure 7b.
A
B
C
Fig 7b
6.9 Overhaul
Inspect the component parts of the trimmer. Re-
place damaged parts as described in the relevant
chapter.
– 27
English