Getting Started; Code Examples; Board Details - Cypress PSoC 64 Secure Boot Manual

1.2

Getting Started

This guide will help you to get acquainted with the CY8CPROTO-064B0S3 "Secure Boot"
Prototyping Kit:
The Software Installation chapter on page 13
■
includes ModusToolbox software which will be used to develop, program and debug applications
on to the device.
The Kit Operation chapter on page 15
■
such as programming, debugging, and the USB-UART and USB-I2C bridges.
The Running Code on PSoC 64 "Secure Boot" MCUs chapter on page 21
■
PSoC 64 code examples that will help you understand how to create your own PSoC 64
applications.
The Hardware chapter on page 32
■
onboard NOR Flash, kit schematics, and the bill of materials (BOM).
1.3

Code Examples

Code examples for ModusToolbox software can be found at
torco/Code-Examples-for-ModusToolbox-Software.
1.4

Board Details

The PSoC 64 "Secure Boot" Prototyping Board has the following features:
CY8CPROTO-064B0S3 board contains a PSoC 64 device
■
512-Mbit external Quad SPI Semper NOR flash that provides a fast, expandable memory for data
■
and code
KitProg3 onboard SWD programmer/debugger, USB-UART and USB-I2C bridge functionality via
■
a Micro-B connector
A second Micro-B connector for USB device interface
■
1.8 V, 2.5 V and 3.3 V operation is supported
■
Two user LEDs, a user button and a reset button
■
One Mode button, one Status LED and one Power LED for the KitProg3
■
CY8CPROTO-064B0S3 PSoC 64 "Secure Boot" Prototyping Kit Guide, Doc. # 002-29505 Rev. *B
describes the installation of the kit software. This
describes the major features of the kit and functionalities
provides a detailed hardware description, methods to use the
https://github.com/cypresssemiconduc-
Introduction
describes multiple
7