Pattern Settings - Sony SS-HQ1 Application Notes

12.5.2. Pattern settings

• Pattern settings
The following table summarizes the patterns that can be output by the PG. The color settings for
monochrome raster are shown in Table 12.5-5.
Parameter
PGPAT CAT9_Byte37_bit0-1
Horizontal color bar
* Note that the images shown above are for reference purposes only.
The patterns that are actually output by the PG will differ slightly from them.
Parameter
PGCOLOR CAT9_Byte37_bit5-7
Table 12.5-4 Pattern types (Pattern settings)
Setting Value
0[h] Color bar
1[h] Monochrome raster
2[h] Impulse
Serial setting
3[h] (see Table 12.5-9 for information on how to make this
setting)
Raster
Fig 12.5-1 Pattern types (Pattern settings)
Table 12.5-5 Raster color settings
Setting Value
0[h]
1[h]
2[h]
3[h]
4[h]
5[h]
6[h]
7[h]
Pattern
Horizontal impulse
Description
Sets raster color to W
Sets raster color to Ye
Sets raster color to Cy
Sets raster color to G
Sets raster color to Mg
Sets raster color to R
Sets raster color to B
Sets horizontal simple ramp (high setting priority)
240
- SS-HQ1 Application Notes -
Ver.1.0.0 January 7, 2005
Serial setting