Settings And Adjustments; Using The Setup Display - Sony HT-CT380 Operating Instructions Manual

Settings and Adjustments

Using the setup display

You can set the following items with the menu.
Your settings are retained even if you disconnect the AC power cord (mains lead).
1
Press MENU to turn on the menu on the front panel display.
2
Press BACK/  (select)/ENTER repeatedly to select the item and press ENTER
to decide the setting.
3
Press MENU to turn off the menu.
Menu list
The default settings are underlined.
Menu items
[LEVEL] [DRC]
(Level) (Dynamic range
control)
[TONE] [BASS]
(Tone) (Bass)
[TREBLE]
(Treble)
[AUDIO] [SYNC] (AV sync)
(Audio)
[DUAL]
(Dual mono)
[EFFECT]
(Sound effect)
16
GB
Function
Useful for enjoying movies at low sound volume. DRC
applies to Dolby Digital sources.
• [ON]: Compresses sound in accordance with the
information contained in the content.
• [AUTO]: Automatically compresses sound encoded in
Dolby TrueHD.
• [OFF]: Sound is not compressed.
Adjusts the bass level.
• The parameters range from [–6] to [+6] in 1-step
increments.
Adjusts the treble level.
• The parameters range from [–6] to [+6] in 1-step
increments.
You can adjust the sound when the image and the sound
are not in sync.
• [ON]: Turns on the AV Sync function.
• [OFF]: Turns off the AV Sync function.
You can enjoy multiplex broadcast sound when the system
receives a Dolby Digital multiplex broadcast signal.
• [M/S]: Main sound is output from the left speaker and sub
sound is output from the right speaker.
• [MAIN]: Outputs only the main channel.
• [SUB]: Outputs only the sub channel.
• [ON]: The sound of the selected sound field is played. It is
recommended to use this setting.
• [OFF]: The input source is down-mixed for 2 channels.
Note
• Even if [EFFECT] is set to [OFF], [EFFECT] is automatically set
to [ON] when you change the sound field setting.