System Concept; Comparison Of Ss-Hq1 And Ss-1M System Specifications - Sony SS-HQ1 Application Notes

1. System Concept

1.1. Comparison of SS-HQ1 and SS-1M System Specifications

The SS-HQ1 system processes camera signals using a two-chip configuration consisting of a DSP
(CXD3172AR) and a digital CCD camera head amp (CXA2096N).
The following table summarizes the major differences between the SS-HQ1 and the specifications for our
SS-1M system, in which CXD2163BR is used as the DSP.
Table 1.1-1 Comparison of SS-HQ1 and SS-1M System Specifications
Supported CCDs
System Configuration
Package
Horizontal resolution
Blemish detection
and compensation
Privacy masking
Mirror Function
Port Driver
External synchronization
Pre-White Balance Adjustment
Color rolling suppression
Flickerless
System clock
Internal ADC
Analog Output
Digital Output
AWB control
External LPF
SS-HQ1
510H, 760H
2-chip configuration
(AFE, DSP)
TG, V-Dr, and EVR are built into DSP
LQFP 100pin
Excellent
Static & Dynamic detection,
maximum 32 points
Up to 8 locations can be set
○
16 ports
LL/VS/VBS/VRHR
Semi-auto
Excellent
Shutter fixing + AGC modulation
1 clock permitted
(contains digital chroma encoder)
10bit
Composite video and
Y/C component video both supported
Conforms to ITU-Rec.601
Conforms to ITU-Rec.656
Feed Forward method
Built into DSP
(performance ensured without LPF)
1
- SS-HQ1 Application Notes -
Ver.1.0.0 January 7, 2005
SS-1M
360H, 510H, 720H, 760H
3-chip configuration
(AFE, TG/V-Dr, DSP)
(separate EVR is required)
LQFP 100pin
Good
Compensation only,
maximum 2 points (no detection)
None
None
None
LL/VS/VBS/VRHR
Manual
None
Shutter fixing only
2 clock inputs
8bit
Y/C component video only
Conforms to ITU-Rec.601
Feed Back method
Required