Sony SA-NS500 Connecting Manual

Listening to audio content on your Mac,
iPhone, iPod touch or iPad
You can play audio from an iPhone, iPod touch or iPad, and also from a Mac.
Turning the speaker on

Connect the unit to an AC power source with the AC
adaptor and the AC power cord.

Set the OPERATE ON/OFF switch to ON.

Set the STANDBY MODE switch to NETWORK
STANDBY.
©2011 Sony Corporation Printed in China
Connecting the speaker

(network settings)

WPS* push button configuration method

Press the WPS button on the access point.

Press the WPS button on the speaker for three
seconds.
Make sure that your Mac/iPhone, iPod touch or iPad are
within the same network as the SA-NS500.
* WPS is a standard for easy and secure establishment of a wireless
home network. Many new wireless LAN routers/access points come
with this feature.
Manual wireless set up
For Mac
1
Connect the unit and the access point using a network
(LAN) cable.
2
Start Safari and Select "Bonjour" under "Bookmark menu".
3
Select "SA-NS500. "
4
Start wireless setting from Browser.
Tips
For details on the wireless settings, refer to "Option 1: Manual wireless

setup" in the operating instructions.
For details on the connection process and terms, refer to "Option 1:

Manual wireless setup" in the operating instructions.
For details on Safari, refer to the Safari help.

For iPhone, iPod touch or iPad
Check the following customer support site
http://esupport.sony.com/
http://esupport.sony.com/CA/
Search for further information using the word "SA-NS500. "
You will find "How to stream music to SA-NS500 from iPhone,
iPod touch or iPad" at the above.
4-418-920-11(1)
Control & stream
for customers in the United States
for customers in Canada
Continued
