iBike Newton+ Operating Instructions Manual page 36

RACER TIP: WHEN 5 SECOND RECORDING INTERVALS ARE CHOSEN, YOUR NEWTON+
WILL AVERAGE THE WATTS DATA FOR 5 SECONDS, THEN RECORD THE AVERAGED DATA
FOR THE PREVIOUS 5 SECONDS
11) ERAS DATA (ERASE RIDE DATA FROM NEWTON+)
After downloading your rides to your Isaac software (see the Isaac software instructions)
you can erase your ride data with the Isaac software.
Alternatively, you can erase your ride data directly on your Newton+:
Click the center button. The word "NO" flashes. If you do NOT want to erase your
•
data, click the center button
If you DO want to erase the data, click the up arrow. The word YES flashes. Click
•
the center button to confirm your choice and erase the data. The word "done"
flashes for a few seconds.
12) REL (firmware release number)
This screen shows the firmware version installed in your unit. You can update can your
firmware to the latest version using the Isaac software. See the Isaac Software
instructions for details.
35
Copyright Velocomp LLP 2005-2013