Table of Contents
Advertisement
17. Once you get to a speed of about 8 mph, the words "DONE COAST" will flash for a
few seconds, then the screen "CALC COAST" (calculating coast) will appear, then
main coast down screen will appear, indicating that the measurement is complete.
CRITICAL: FOR BEST RESULTS PERFORM 5 TO 8 COAST DOWNS, BACK-TO-BACK.
RETURN TO THE PLACE WHERE YOU STARTED YOUR FIRST COAST DOWN AND DO
MORE COAST DOWNS BY REPEATING STEPS 6-15.
CRITICAL: DO COAST DOWNS ONLY IN CALM WIND CONDITIONS, AND ON ROADS THAT
ARE LEVEL TO UPHILL.
TIP: IF YOU ACCIDENTALLY INITIATE THE COAST-DOWN CALIBRATION PROCESS YOU
MAY STOP IT BY CLICKING THE CENTER BUTTON. THE SCREEN WILL SAY "Abrt COASt"
(abort coast). THE COAST-DOWN READINGS CURRENTLY STORED WILL BE UNCHANGED.
RACER TIP: BY DEFAULT, THE COAST DOWN USES A FIXED VALUE OF ROLLING
RESISTANCE (CRR = 0.0054) IN THE COAST DOWN MEASUREMENT.
IMPORTANT:
YOUR COAST DOWN AND CAL RIDE DATA MUST BE DOWNLOADED AND
ANALYZED IN THE ISAAC SOFTWARE TO PROVIDE YOU THE BEST RESULTS. SEE THE
"ISAAC SOFTWARE INSTRUCTIONS" FOR
DETAILS.
23
Copyright Velocomp LLP 2005-2013
Advertisement
Table of Contents
