Table of Contents
Advertisement
IMPORTANT: WHEN SHIPPED FROM THE FACTORY, PROFILES 2-4 HAVE FACTORY-
DEFAULT PARAMETERS. WHEN YOU FIRST SELECT PROFILE 2-4, YOU WILL NEED TO
PERFORM A "SCAN" AND "CAL RIDE" TO SET THAT PROFILE FOR YOU AND YOUR BIKE.
USING PROFILES
If you have three different profiles stored in your Newton+, say for three different bikes, to
use your Newton+'s Profile 3 with bike #3, enter setup, scroll to Set Prof, click the center
button, then click the up arrow to select "Prof 3", then click the center button to accept.
Then, exit setup. Your Newton+ will now load all the settings for Profile 3 into memory and
you're ready to ride.
11
Copyright Velocomp LLP 2005-2013
Advertisement
Table of Contents
