Setting And Using The Newton+ Profile - iBike Newton+ Operating Instructions Manual

How to use the Device/Setup Device wizard
and follow the prompts on the computer screen to enter your information. After you've
completed your data entry, click the "Send Profile to iBike" button. Your Newton+ data will
be updated and your Newton+ will be dialed-in.
After completing the Basic Information prompts, attach your Newton+ to your bike and
proceed to Sensor Pairing.
TIP: YOU CAN FINE-TUNE YOUR NEWTON+ DIRECTLY, WITHOUT A COMPUTER,
USING THE "FAST START SEQUENCE" AVAILABLE THROUGH SETUP. ENTER SETUP,
SCROLL TO "NO FAST START". CLICK THE CENTER BUTTON; "NO" FLASHES. CLICK
ANY BUTTON TO SELECT "YES". CLICK THE CENTER BUTTON. THEN, CLICK THE UP
ARROW TO ENTER YOUR DATA. TO CHANGE DATA, CLICK THE CENTER BUTTON.
8
Copyright Velocomp LLP 2005-2013