Table of Contents
Advertisement
Problem: Unit locks-up (screen displays numbers but buttons don't work)
To correct this condition, perform a "Hard Reset" by press-holding the left, bottom,
right, and center buttons simultaneously. Release the buttons when the screen goes blank.
Problem: I can't download data to my computer and/or upload data to my
Newton+
Possible causes:
1) Newton+ is sleeping (nothing is visible on the display screen). Click the center
button to turn on the Newton+ and make its display visible.
2) USB cable isn't plugged into your computer.
3) USB cable isn't plugged in to your Newton+
4) Isaac software and/or USB drivers are installed improperly. Contact Technical
Support for assistance, technicalsupport@velocomp.com
44
Copyright Velocomp LLP 2005-2013
Advertisement
Table of Contents
