Table of Contents
Advertisement
Right Arrow: ENVIRO (Environment) SCREENS/FIT TRAIN MODE
You can learn useful information about your ride by clicking the Enviro button (right arrow).
o Click the right arrow: Temperature and current time are displayed.
o Click the right arrow again (enviro screen 2): current hill slope, wind speed,
and current elevation are displayed
o Click the right arrow again (enviro screen 3): main screen is shown.
SPECIAL
FEATURE: AFTER ENABLING THE "FIT TRAIN" FEATURE IN THE RACR
SEQUENCE, YOU CAN START PRE-PROGRAMMED WORKOUTS BY PRESS-HOLDING THE
RIGHT ARROW FOR TWO SECONDS. SEE BELOW FOR MORE DETAILS ABOUT FITNESS
TRAINING SCREENS, AND HOW TO ENABLE THE FEATURE.
Left Arrow: TOTAL SCREENS/LAP SCREEN
You can get summary statistics for the entire ride with the "Total" screens. Total screens
are shown by clicking the left arrow.
Click left arrow once: Battery charge % is shown. TIP: When battery charge %
•
screen is shown, you can press-hold center button to turn Newton+ off
Click left arrow again: Total energy expended (in kilojoules or KJ) and calories
•
(Kcal) are displayed.
Click left arrow again, ride distance traveled and elevation gained are displayed.
•
SPECIAL
FEATURE: IF YOU HAVE SELECTED "TSS ON" IN THE RACR SEQUENCE, THE
NEXT THREE SCREENS SHOW NORMALIZED POWER (NP), INTENSITY FACTOR (IF) AND
TRAINING STRESS SCORE (TSS).
Click the left arrow again and "x% Full" shown ("x" is a number between 0 and 99).
•
This screen indicates the amount of memory used (logged) by your ride files. When
the screen says 0% full your ride memory is empty; when it says 99% full your ride
memory is full.
TIP: THE NEWTON+ RECORDS AT ONE SECOND INTERVALS (155 HOURS OF DATA
RECORDING) OR FIVE SECOND INTERVALS (768 HOURS OF DATA RECORDING). YOU CAN
SELECT THE RECORD INTERVAL IN THE SETUP SCREEN. THE NEWTON+ HAS 4x AS MUCH
RECORDING CAPACITY AS THE NEWTON.
14
Copyright Velocomp LLP 2005-2013
Advertisement
Table of Contents
