Table of Contents
Advertisement
Pronar T700
Check tightness of connections in accordance with Chapter (5.3.2).
FIG. 5.10
Installation of the pneumatic line
(1) pneumatic line, (2) connecting nut (3) clamping ring, (4) reinforcing sleeve
5.4 HYDRAULIC SYSTEM MAINTENANCE
5.4.1 PRELIMINARY INFORMATION
Work connected with the repair, change or regeneration of hydraulic system components
(suspension cylinders, valves etc.) should be entrusted to specialist establishments, having
the appropriate technology and qualifications for this type of work.
The duties of the operator connected with the hydraulic system include:
• inspecting and checking air tightness of system.
The ends of the pneumatic line (1) must be cut exactly at right angles.
Clamping ring (3) should be fitted according to figure (5.10).
Reinforcing sleeve (4) of the line must be thoroughly depressed.
5.24
SECTION 5
Advertisement
Table of Contents
