Cleaning Trailer - PRONAR T700 Operator's Manual

SECTION 5
characteristics should typify aerosol preparations (Silicon greases and anticorrosive lubricant
substances).
Before starting to use greases acquaint oneself with the content off the information leaflet for
the chosen product. In particular, the principles of safety and handling of the lubricant and
method of disposal (waste containers, contaminated rags, etc.) are essential. Information
leaflet (product sheet) should be stored together with the grease.

5.8 CLEANING TRAILER

Trailer should be cleaned depending on requirements and before longer idle periods (e.g.
before winter period). Before using pressure washer the user is obliged to acquaint himself
with the operating principles and recommendations concerning safe use of this equipment.
Trailer cleaning guidelines
• Before cleaning the trailer open the tailgate. Carefully clean load remains from the
load box (sweep out or blow out with compressed air), especially where tailgate
and extensions join together.
• To clean trailer only use clean running water or water with a cleaning detergent
additive with neutral pH.
• Using pressure washer increases washing effectiveness, but particular care must
be taken during work. During washing washer nozzle may not be closer than 50
cm from the surface being cleaned.
• Water temperature shall not exceed 55°C.
• Do not direct water stream directly at system and equipment elements of trailer
i.e. control valve, braking force regulator, brake cylinders, hydraulic cylinders,
pneumatic, electric and hydraulic plugs, lights, electrical connections, information
and warning decals, identification plates, line connections, leaf springs and trailer
lubrication points etc. Great water jet pressure may damage these elements.
• For cleaning and maintenance of plastic coated surfaces it is recommended to
use clean water or special preparations designed for this purpose.
5.35
Pronar T700