Installation - YASKAWA S-7 Series Manual

2

Installation

When you install a SERVOPACK, refer to Chapter 3 SERVOPACK Installation
in the product manual for your SERVOPACK.
The installation conditions are given in the following table.
Item
Surrounding
Air 
*1
Temperature
Storage 
Temperature
Surrounding
Air Humidity
Storage
Humidity
Vibration
Resistance
Shock 
Resistance
Degree of Pro-
tection
Pollution
Degree
*1
Altitude
Others
*1. If you combine a -7-Series SERVOPACK with a -V-Series Option Module,
the following -V-Series SERVOPACKs specifications must be used: a sur-
rounding air temperature of 0°C to 55°C and an altitude of 1,000 m max. Also,
the applicable range cannot be increased by derating.
-5C to +55C
*2
(With derating , usage is possible between 55C and 60C.)
-20C to +85C
95% relative humidity max. 
(with no freezing or condensation)
95% relative humidity max. 
(with no freezing or condensation)
2
4.9 m/s
2
19.6 m/s
I
Degree
• SGD7S-R70A, -R90A, -1R6A, -2R8A, -3R8A, -
5R5A, -7R6A, and -120A (3-phase 200-VAC
IP20
input)
• SGD7W-1R6A, -2R8A, -5R5A, and -7R6A
SGD7S-120A008 (single-phase 200-VAC
IP10 input), -180A, -200A, -330A, -470A, -550A, -
590A, and -780A
2
• Must be no corrosive or flammable gases.
• Must be no exposure to water, oil, or chemicals.
• Must be no dust, salts, or iron powder.
1,000 m or less. (With derating
1,000 m and 2,000 m.)
Do not use the SERVOPACK in the following locations: Loca-
tions subject to static electricity noise, strong electromagnetic/
magnetic fields, or radioactivity
Specification
SERVOPACK Models
*2
, usage is possible between
2 Installation
E-17