YASKAWA S-7 Series Manual page 6


Storage Precautions
• Do not place an excessive load on the product during storage. (Follow all
instructions on the packages.)
There is a risk of injury or damage.
• Do not install or store the product in any of the following locations.
• Locations that are subject to direct sunlight
• Locations that are subject to ambient temperatures that exceed product spec-
ifications
• Locations that are subject to relative humidities that exceed product specifi-
cations
• Locations that are subject to condensation as the result of extreme changes
in temperature
• Locations that are subject to corrosive or flammable gases
• Locations that are near flammable materials
• Locations that are subject to dust, salts, or iron powder
• Locations that are subject to water, oil, or chemicals
• Locations that are subject to vibration or shock that exceeds product specifi-
cations
• Locations that are subject to radiation
If you store or install the product in any of the above locations, the product
may fail or be damaged.

Transportation Precautions
• Transport the product in a way that is suitable to the mass of the product.
• Do not use the eyebolts on a SERVOPACK or Servomotor to move the
machine.
There is a risk of damage or injury.
• When you handle a SERVOPACK or Servomotor, be careful of sharp parts,
such as the corners.
There is a risk of injury.
• Do not place an excessive load on the product during transportation. (Follow
all instructions on the packages.)
There is a risk of injury or damage.
E-4
CAUTION
NOTICE
CAUTION