YASKAWA S-7 Series Manual page 8

• Do not install or store the product in any of the following locations.
• Locations that are subject to direct sunlight
• Locations that are subject to ambient temperatures that exceed product spec-
ifications
• Locations that are subject to relative humidities that exceed product specifi-
cations
• Locations that are subject to condensation as the result of extreme changes
in temperature
• Locations that are subject to corrosive or flammable gases
• Locations that are near flammable materials
• Locations that are subject to dust, salts, or iron powder
• Locations that are subject to water, oil, or chemicals
• Locations that are subject to vibration or shock that exceeds product specifi-
cations
• Locations that are subject to radiation
If you store or install the product in any of the above locations, the product
may fail or be damaged.
• Use the product in an environment that is appropriate for the product specifi-
cations.
If you use the product in an environment that exceeds product specifications,
the product may fail or be damaged.
• A SERVOPACK or Servomotor is a precision device. Do not drop it or subject
it to strong shock.
There is a risk of failure or damage.
• Always install a SERVOPACK in a control panel.
• Do not allow any foreign matter to enter a SERVOPACK or a Servomotor with
a Cooling Fan and do not cover the outlet from the Servomotor's cooling fan.
There is a risk of failure.

Wiring Precautions
• Do not change any wiring while power is being supplied.
There is a risk of electric shock or injury.
E-6
NOTICE
DANGER