10.8
Checking the static sag of the shock absorber
Main work
–
Measure the vertical distance between the rear axle and a fixed
point such as a marking on the side cover.
–
Note the value as dimension
400988-10
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Measure dimension
–
Hold the motorcycle upright with aid of an assistant.
–
Measure the distance between rear axle and fixed point again.
–
Note the value as dimension
Info
The static sag is the difference between measurements
B
and
–
Check the static sag.
Static sag
»
If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber.
(
p. 36)
400989-10
TUNING THE CHASSIS 10
A
.
A
of rear wheel unloaded. (
B
.
.
30 mm (1.18 in)
p. 42)
p. 34)
A
35