–
Push back the protection caps on the handlebar controls to allow
water to evaporate.
–
After the motorcycle has cooled down, lubricate all moving parts
and pivot points.
–
Clean the chain. (
p. 60)
–
Treat bare metal (except for brake discs and the exhaust system)
with a corrosion inhibitor.
Preserving materials for paints, metal and rubber (
–
Treat all plastic parts and powder-coated parts with a mild cleaning
and care product.
Special cleaner for glossy and matte paint finishes, metal and
plastic surfaces (
p. 120)
CLEANING, CARE 17
p. 119)
105