Removing The Rear Wheel - GAS GAS MC 85 2021 Owner's Manual

13.3

Removing the rear wheel

–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease shaft seal rings
spacers.
Long-life grease (
–
Insert the spacers.
H00935-10
–
Clean and grease the wheel spindle.
Long-life grease (
–
Position the front wheel.
The brake linings are correctly positioned.
–
Insert the wheel spindle.
–
Mount and tighten screw
Guideline
Screw, front wheel
S04328-13
spindle
–
Operate the hand brake lever several times until the brake linings
are seated correctly against the brake disc.
–
Remove the motorcycle from the lift stand. (
–
Operate the front brake and compress the fork a few times firmly.
The fork legs straighten.
–
Tighten screws
Guideline
Screw, fork stub
Preparatory work
–
Raise the motorcycle with a lift stand. (
1
and contact surfaces
p. 119)
p. 119)
2
.
M20x1.5 35 Nm (25.8 lbf ft)
3
.
M8 15 Nm (11.1 lbf ft)
p. 42)
WHEELS, TIRES 13
A
of the
p. 42)
81