–
Change the radiator cap.
–
Mount the air filter dust cover.
Air filter dust cover (47206920000)
Info
Observe the GASGAS Technical Accessories fitting instruc-
tions.
M01104-01
–
Mount the air filter sand cover.
Air filter sand cover (79006922000)
Info
Observe the GASGAS Technical Accessories fitting instruc-
tions.
M01105-01
–
Adjust the carburetor jetting and setting.
Info
The recommended carburetor tuning is available from your
authorized GASGAS Motorcycles workshop.
–
Clean the chain.
Chain cleaner (
–
Grease the chain.
M01107-01
Universal oil spray (
–
Clean the radiator fins.
–
Straighten the bent radiator fins carefully.
Condition
Regular use in sand
–
Change the piston every 10 operating hours.
PREPARING FOR USE 7
Warning
Danger of scalding During motorcycle operation,
the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or
other cooling system components if the engine
or the cooling system are at operating temper-
ature.
–
Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
–
In the event of scalding, rinse the area affected
immediately with lukewarm water.
p. 119)
p. 120)
21