11.32
Checking for chain dirt accumulation
Main work
–
Check the throttle cable routing. (
–
Position the fuel tank and fit the two spoilers to the sides of the radi-
ator mount.
–
Make sure that no cables or throttle cables are trapped or damaged.
S04346-11
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
S04345-11
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Mount fuel hose.
–
Position the fuel tank breather in the steering stem.
S04344-11
Finishing work
–
Mount the seat. (
–
Check the chain for coarse dirt accumulation.
»
If the chain is very dirty:
–
Clean the chain. (
400678-01
SERVICE WORK ON THE CHASSIS 11
p. 64)
1
with the rubber bushing.
M6
10 Nm (7.4 lbf ft)
2
.
M6
10 Nm (7.4 lbf ft)
p. 53)
p. 60)
59