Verifying The Printer Setting - Hypercom T7 Series Troubleshooting Manual

Chapter 1
4VMRXIVW
If the printer is functioning improperly, such as printing incorrect characters or not printing at all,
use the following function or the troubleshooting steps found on the following pages.
Step-by-Step
1. Verify the printer connections are secure.
2. Verify the printer type is correct in Term-Master setup. See the Term-Master Profile
documentation for details about printer types.
3. If you have a terminal with an EPROM of 2.00 or higher, verify the printer setting in the
terminal's Boot level. For instructions, refer to "Verifying the Printer Setting" on page 1-21.
4. Verify the printer is enabled by pressing the key sequence: Function, 7,1, Enter. To enable
the printer when the terminal displays,
5. Perform a printer test by pressing the key sequence: Function, 8, 2, Enter.
Use this function to output a sample receipt and verify the printer is printing all the characters
and fonts correctly.
1-20
DISABLED
35,17(5 ,6 ',6$%/('"
(1$%/('
35,17 7(67 &203/(7(
T7 Series Troubleshooting Manual
, press Enter.
<(612
940114-020